Kohler KGP, Manual

Page: 63 / 126

TP-6461 1/08 63 Section 4 Controller Test and Replacement
Type of Test
Unloaded
B
Main Start
System OK
LD Exer ##/## @ ##:##
Norm ###V Emer ###V
B
View Set Test
Enter Password
Time to Enter #:##
> ? ? ? ? <
OK
Type of Test
Auto Loaded
Time :## min
B
Main
"
Start
Type of Test
Loaded
LD# Disc in ##:##
Norm ###V Emer ###V
Xfr to Off in ##:##
Norm ###V Emer ###V
Xfr to Emer in ##:##
Norm ###V Emer ###V
Add LD# in ##:##
Norm ###V Emer ###V
System on Test
Norm ###V Emer ###V
Auto Loaded Test
Enter Time
Time: ?? min
Back OK
Xfr to Norm in ##:##
Norm ###V Emer ###V
Add LD# in ##:##
Norm ###V Emer ###V
Eng Cooldown ##:##
Norm ###V Emer ###V
Xfr to Off in ##:##
Norm ###V Emer ###V
B
Main Start
Engine Start in ##:##
Norm ###V Emer ###V
End End
Main Delay Test
LD# Disc in ##:##
Norm ###V Emer ###V
Press the Test button.
Use the open arrow buttons to enter the Test password.
Then press the OK button.
Press the down arrow button to step
to the next type of test.
Press the Start button to initiate the
displayed type of test sequence.
Test Sequence Screens
Press the End Test button during the test run to end the test and
return to normal operation. An Auto-Load test will end
automatically after the set time .
During a test sequence, press the End Delay button to end the
current time delay, if desired. Press Main to step to the main
screen, then Test to return to the test sequence screens.
The displays shown to the right will appear during the test
sequence. Some displays are dependent on the system settings
and may not appear.
End End
Main Delay Test
End End
Main Delay Test
End End
Main Delay Test
End End
Main Delay Test
End End
Main Delay Test
End End
Main Delay Test
End End
Main Delay Test
End End
Main Delay Test
End End
Main Delay Test
End End
Main Delay Test
For an auto loaded test, press the right arrow button
and enter the desired length of the test run. Press
OK and then press Start to initiate the test sequence.
OR:
Figure 4-7 Test Sequence Screens