Kohler KDI 1903 TC Owner'S Manual Download Page 56 | Manualshive

Page: 56 / 64

background image

8

INFORMATION

ABOUT WARRANTY

EN

56

List of Authorized dealers can be found by visiting www.kohlerengines.com or telephone 1-800-544-2444
(U.S.A. and Canada) ENGINE DIVISION, Kohler Co., Kohler Wisconsin

EUROPE, MIDDLE EAST, AND ASIA

List of Authorized dealers can be found by visiting

dealers.kohlerpower.it

.

CENTRAL AND SOUTH AMERICA

List of Authorized dealers can be found by visiting

dealers.kohlerpower.it

.

CHINA AND ASIA PACIFIC

List of Authorized dealers can be found by visiting

dealers.kohlerpower.it

.

INDIA

List of Authorized dealers can be found by visiting

dealers.kohlerpower.it

.

Note: Specific Warranty Terms and conditions do apply to engines directly sold in India.

4.

OWNER'S WARRANTY RESPONSIBILITIES

1.

As the off-road engine owner, you are responsible for the performance of the required
maintenance listed in your Use & Maintenance Manual. Kohler Co. recommends that you retain
all receipts covering maintenance on your off-road & marine engine, but Kohler Co. cannot deny
warranty solely for the lack of receipts or for your failure to ensure the performance of all
scheduled maintenance.

2.

As the off-road & marine engine owner, you should however be aware that Kohler Co. may deny
you warranty coverage if your off-road & marine engine or a part shows signs of malfunction or
failed due to abuse, neglect, improper maintenance or unapproved modifications.

3.

Your engine is designed to operate on diesel fuel only. Diesel fuel an all other fluids used shall
comply with the recommendation listed in the Use & Maintenance Manual. Use of any other fuel
or fluids may result in your engine breakage, premature wear or no longer operating in
compliance with the California & US EPA emissions requirements.

4.

You are responsible for initiating the warranty process. The ARB & US EPA suggests that you
present your off-road & Marine engine to a Kohler Co. dealer as soon as a problem exists. The
warranty repairs should be completed by the dealer as expeditiously as possible.

5.

COVERAGE

Kohler Co. will repair or replace emission control system parts, components and sub-assemblies found
to be defective with respect to materials or workmanship at no cost to you including engine exhaust
system related diagnosis, labor and parts, provided that no un-authorized modification of any kind has
been executed on the engine, and its parts, components and sub-assemblies.

«
...
54
55
56
57
58
...
»

Summary of Contents for KDI 1903 TC

































































Reviews:

No comments

Related manuals for KDI 1903 TC

Brand: jcb Pages: 122

Brand: BAFANG Pages: 6

Brand: BAFANG Pages: 12

Brand: D+H Pages: 20

Jeep Six-Cylinder

Brand: Golen Pages: 11

Brand: Globe Pages: 11

Brand: YASKAWA Pages: 447

Brand: Barrus Pages: 97

290000 Vanguardv Gasoline

Brand: Briggs & Stratton Pages: 13

Brand: O.S. engine Pages: 2

SOLIDline-MOR GU4510

Brand: GEIGER Pages: 8

Brand: Yanmar Pages: 213

Brand: Yanmar Pages: 240

Car engines GX640

Brand: Honda Pages: 33

Brand: Honda Pages: 38

Brand: Honda Pages: 39

Brand: O.S. engine Pages: 23

Brand: Honda Pages: 222

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands