6
INFORMATION
ABOUT REPLACEMENTS
EN
50
6.4
Filter cartridge and fuel pre-filter replacement
Important
•
Before proceeding with operation,
read
Warning
•
In case of low use replace il 12 months.
•
For disposal of oil filter cartridge and
fuel filter refer to
1.
Disconnect the cable
A
of the water
presence sensor
C
.
2.
Remove the water presence sensor
C
from its cartridge
B
.
3.
Loosen the cartridge
B
using the
appropriate wrench
F (Fig. 6.10)
.
4.
Lubricate the gasket
D
of the new
cartridge B.
Important
• Do not fill the new cartridge
B
with fuel.
5.
Tighten the new cartridge
B (Fig. 6.10)
on the diesel fuel filter support
E
using
the special wrench
F
(tightening torque
of
17 Nm
).
6.
Tighten the water presence sensor
C
on
the new cartridge
B
(tightening torque of
5 Nm
).
7.
Reconnect the cable
A
of the water
presence sensor
C
.
8.
Push repeatedly the button
G
in order to
fill the circuit.
Fig 6.9
Fig 6.10
NOTE
: Click on the right to play the procedure.
https://www.youtube.com/embed/MXs9IUimUi4?rel=0
