e
e
Page 12
INSTALLATION INSTRUCTIONS
ENGLEFIELD
8
(a)
Apply sealant in accordance with the sealant manufacturer’s instructions. Apply to
the locations shown above. Seal the outside surfaces only. Do not seal from inside.
(b)
Allow the silicone sealant to cure for 24 hours before use.
(c)
Fit the corner covers to the wall channels. They should ‘snap’ into place.
(d)
a
a
a
a
a
a
c
c
d
Full length
200mm up
Full length
Full length
200mm up
Full length
- Installation Complete -
Fit cover caps to the top of extrusions. If required, modify caps and affix with silicone.
(e)
Install the wall finishing strips, if desired.
VALENCIA ELITE
Square Sliding
wall board
retainer
channel
silicone
silicone or
adhesive
finishing
strip
wall
liner
e
b
