9.5
Section 9
Disassembly
9
Figure 9-14. Removing Control Bracket.
Figure 9-15. Removing Control Bracket and Air
Cleaner Bracket (Some Models).
2. Disconnect the spring from the governor lever;
note hole locations for reassembly.
3. Remove the choke linkage from the choke
actuator lever and carburetor.
Remove External Governor Controls
1. Loosen the hex. flange nut and remove the
governor lever from the cross shaft. See Figure
9-16. Leave the lever attached to the throttle
linkage.
Figure 9-16. Removing Governor Lever.
Remove Carburetor
WARNING: Explosive Fuel!
Gasoline may be present in the carburetor and fuel
system. Gasoline is extremely flammable, and its
vapors can explode if ignited. Keep sparks and other
sources of ignition away from the engine.
1. Disconnect the fuel shut-off solenoid lead if so
equipped.
2. Remove the two carburetor mounting nuts
(commercial mower style air cleaners). See
Figure 9-17.
Figure 9-17. Removing Carburetor Mounting Nuts
(Commercial Mower Base Shown).
3. Remove the carburetor, throttle linkage and
governor lever as an assembly. See Figure 9-18.
Control Bracket
Air Cleaner Brackets
(Some Models)
Control Bracket
Governor Lever
Kohler Engine Parts Call K&T 606-678-9623 or 606-561-4983
www.mymowerparts.com
