6
116897-2-
AB
Kohler Co., Kohler, WI
G. FINAL ADJUSTMENT / ATTACH ROLLER
PATCH COVERS
If necessary, adjust the moving panels using the top
rollers. Disengage catches at the bottom track, refer to
Install Moving Panels on page 2.
Loosen roller screws and adjust panels by shifting panels
and re-positioning until level.
After adjusting panels, tighten roller screws.
Insert the four roller patch covers.
Cover
Male Roller
Patch
H. INSTALL INTERLOCK BASE AND SEAL
Slide both interlock seals into the interlock bases.
Push an interlock base onto the trailing edge of each
moving panel.
Trailing
Edge of
Moving
Panel
If interference when closing the door is excessive, the
interlock seal can be changed to the depth shown.
Interlock Base
Interlock Seal
Excessive Interference
If there is not enough interference when closing the door,
the interlock seal can be changed to the depth shown.
Interlock Base
Interlock Seal
Insufficient Interference
