2
116897-2-
AB
Kohler Co., Kohler, WI
2. INSTALLATION
A. INSTALL FIXED PANELS
NOTE: Assemble door enclosure on a clean and
non-abrasive surface (such as a drop cloth) to
prevent damage.
Position the right-hand fixed panel onto the top and
bottom track and align the holes in the glass with the
installed female patch.
Align the hole in the fixed panel male patch with the screw
hole in the female patch and fasten with four M6 x 10 Flat
Sockethead screws. Use the hex wrench provided to
fasten the screws but do not tighten the screws at this
time.
Repeat the above procedures to install the left-hand fixed
panel.
Installed Fixed Panel Patch - Female
Fixed Panel Patch - Male
M6 x 10 Flat Sockethead
Screw
Screw Cover
Top
Bottom
Right-Hand
Fixed Panel
Left-Hand Fixed Panel
B. INSTALL MOVING PANELS
Apply supplied silicone lubricant to the bottom track
groove, making sure to apply to the entire length of the
groove.
Apply Silicone Lubricant to
the Bottom Track Groove