8.11
Section 8
Electrical System and Components
8
Delco-Remy Starters
Figure 8-10.
Starter Disassembly
1. Remove the hex. nut and disconnect the positive
(+) brush lead/bracket from the solenoid terminal.
2. Remove the three screws* securing the solenoid
to the starter. Remove the solenoid and plunger
spring from the drive end cap. See Figures 8-11
and 8-12.
Figure 8-11. Removing Solenoid Screws.
*Solenoids mounted with external Torx head
screws may be removed using an E5 Torx
socket, available through local tool suppliers.
Figure 8-12. Solenoid Removed from Starter.
3. Lift and unhook the plunger assembly from the
drive lever. Remove the gasket from the recess in
the housing. See Figure 8-13.
Figure 8-13. Removing Plunger.
4. Remove the two thru (larger) bolts. See Figure 8-14.
Figure 8-14. Removing Thru Bolts.
Not For Resale
www.SmallEngineDiscount.com
