Thank you for Choosing KOHLER
Need help? Contact our Customer Service.
• Visit:
• Call: +(44) 0800-001-4466
Guarantee
This product is covered under the KOHLER
®
Digital Taps, Valves, and Controls Five-Year Guarantee. For a hardcopy of
guarantee terms, contact Customer Service.
Important Safety Information
Products manufactured by Kohler Co. are designed to be safe, provided that they are installed, used, and maintained in
good working order, in accordance with our instructions and recommendations. Follow all warnings, cautions and
instructions contained in this guide, and on, or inside the product.
WARNING: To reduce the risk of fire, electric shock or injury please read the important information listed
below.
Installation of this product must be carried out in accordance with these instructions by qualified, competent personnel.
Read all instructions before commencing installation.
The electrical installation must comply with BS 7671 (commonly referred to as the IET Wiring Regulations) and all
relevant building regulations, or any particular regulation or practice specified by the local electricity supply company.
The plumbing installation must comply with all national or local water regulations and all relevant building regulations,
or any particular regulation or practice specified by the local water supply company.
Isolate the electrical and water supplies before commencing installation.
For any copper pipework, verify that supplementary bonding is provided in accordance with the wiring regulations.
A 30 mA Residual Current Device (RCD) must be included in the electrical circuit. This may be part of the consumer unit
or a separate unit.
DO NOT install the digital mixing valve or user controller in areas with high humidity and temperature (for example,
steam rooms and saunas).
DO NOT install the digital mixing valve or fittings where they may be exposed to freezing conditions. Verify that any
pipework that could become frozen is properly insulated.
DO NOT perform any unspecified modifications, drill, or cut holes in the product other than instructed by this guide.
When servicing only use genuine KOHLER replacement parts.
If the product is dismantled during installation or servicing, then, upon completion, an inspection must be made to verify
that all electrical connections are secure and that there are no leaks.
1430528-W2-
A
2
Kohler Co.
