CC Monitor
DTY-CMH-01
取扱説明書
Owner’s Manual
2007年6月 Ver.2.0
June, 2007 Ver.2.0
©
株式会社コガネイ クレシード事業部
© Koganei Corp. Creceed Division
本書の内容の一部、もしくは全てを無断で
複写・転写することを禁じます。
The contents of this manual, or any portion
thereof, may not be duplicated or copied
without permission by Koganei.
内容についてのご不明な点や技術的なご質問がございましたら、下記へお問い合わせください。
□
クレシード事業部
184-8533
東京都小金井市緑町3-11-28
クレシード専用フリーダイヤル
7
0 1 2 0 - 5 5
ゴーゴー
- 9 0 4 0
ク レ シ ー ド
9.Troubleshooting
Situation
Check this
The first 5 minutes after switching on the power is
measurement preparation time. For 5 minutes, the LEDs
light up sequentially to show that preparation time is in
progress. When 5 minutes have elapsed, measurement
begins.
Check that the device body’s up-and-down direction is correct.
If the ventilation inlet and outlet are blocked, accurate
measurement cannot be performed. Check the installation.
Check whether there is a source of intense noise near the
device location or not.
Press the SET button.
Press the RESET button.
Pressing the RESET button shuts off the buzzer only. The
alarm LED and external output continue to be turned on.
When the particle density becomes cleaner than the alarm
setting value, the alarm display and external output will
turned off. For the alarm output patterns, see p.
#5
, “6-3.
Alarm operation.”
Check that the hardware and software configurations for
Ethernet communications are complete. For connection to
a hub in the network, use a straight cable, and for
connection directly to a personal computer, use a cross
cable.
Switched on the power
and the display appeared,
but then LEDs began
lighting up sequentially.
Even though the
measurement target is
contaminated, no display
is appearing. Or, even
though the target is clean,
the red display remains
on.
Even though the rotary
switch was used to
change the alarm setting,
the change is not
activated in the
operational setting.
Alarm buzzer will not stop.
LED light won’t go off
even after the RESET
button was pressed.
Can’t connect to the
network.
$1
JUST CONSULT US
KOGANEI CORPORATION
OVERSEAS DEPARTMENT
3-11-28, Midoricho, Koganei City, Tokyo 184-8533, Japan
TEL: 042-383-7271 FAX: 042-383-7276
改訂履歴
History of Revisions
Ver.2.0 英文併記
Ver.2.0 Along with English translation