1.
Place the charging base on the flat ground against the wall. Ensure there is no
obstacle within the range of 1.5 metres in length and 0.5 metres in width.
2.
Remove the protective strip before use.
Wall Surface
Ground
Note:
Do not frequently move the charging dock. �If the charging dock’s location is
changed, the robot vacuum may lose the layout in memory due to failure in
positioning. It will then need to rebuild the layout map.
Map rebuilding may result in information such as no-cleaning areas being lost.
Summary of Contents for SMARTERHOME LX8
