Kogan SmarterHome G50, Manual

Page: 18 / 40

18
Mopping mode:
Applicable scenario: Used to do wet & dry mopping.
Install the water tank in the vacuum and press the start button on the vacuum or the
automatic cleaning button or ( ) buttons on the remote controller to start
mopping mode.
Note:
If the water tank is not installed and the button is selected on the remote
controller, the vacuum will prompt that the water tank is not installed, and the robot vacuum
will not work.
Press the button ( ) and the vacuum will switch to single room cleaning mode.
Press the button ( ) and the vacuum will switch to border cleaning mode.
Single room cleaning:
Applicable scenario: Used to clean a single room.
Click the mode switch button ( ) on the remote control to select the single room
cleaning mode and to start single room cleaning.
Note:
When it is necessary to clean a single room, please close the door and the vacuum
will do centralised cleaning in the room.
If this room does not have a charging station, the vacuum will return to the original point
after finishing the cleaning.
Border cleaning:
Applicable scenario: For indoor border cleaning, the vacuum cleans along the perimeter of
fixed objects (such as walls) and returns to the charging station after the border cleaning is
finished.
Setting method: Click the mode switch button ( ) on the remote control to select
the border cleaning mode and to start the border cleaning.
Manual control:
Applicable scenario: Suitable for manual control cleaning.
Setting method: Click on the buttons on the remote controller to move forward, turn 180°
and to turn right or left.