Kogan SmarterHome G50, Manual

Page: 12 / 40

12
Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (the indicator
light will be continuously flashing).
If not automatically in pairing mode when powered on, you can manually set the device in
pairing mode by double clicking the Start/Pause button until the light begins flashing.
Using AP Mode to add device
5. Once registered, tap “
+
” in the upper right corner of the app’s home page to add a
new device through the network.
6. Select the product type from the list of options in the app (Cleaning Appliances >
Vacuum Cleaners), and then select
“Other Mode”
from the top-right corner when
asked to reset the device.