return to the preview state. Then press the “
Photo
” key to start reverse counting timer.
When the preset time is reached, the auto-shooting indicator blinks, and the camera
takes a picture. To restore to other shooting modes, set “
Timed Shooting
” to “
OFF
”.
Otherwise, the camera maintains in timed shooting mode.
f.
Display time: In the preview state, press the “
M
” key. On the setup interface, choose
“
Display Time
”. If you set this parameter to ON in advance, the camera automatically
records the date and time during shooting and displays them in the bottom-lower corner
of the photo. If you set this parameter to OFF in advance, the camera does not display
the date and time during shooting. (The display time function is unavailable for photo
shooting in
1080i
,
WVGA/100fps
, and
WVGA/120fps
modes).
Note
:
•
The timed shooting function and other shooting functions cannot be simultaneously
enabled. Set Timed shooting to “
OFF
” to restore to the other shooting modes. Otherwise,
the camera is defaulted in timed shooting mode.
•
In single shot mode, the Auto cont. capture parameter is automatically set to OFF.
•
If the Auto cont capture parameter is set to 1s, the time display function is unavailable.
Set System Parameters
a.
Prompt tone: Set this parameter to “
ON
” to enable the tick tone or OFF to mute the tick
tone.
Note: This parameter cannot be set to mute the prompt tones for shooting and video
recording. Instead, this parameter can only be set to mute the tone generated upon
pressing a key on the TFT screen and no-operation prompt tones.
b.
Status indicator: After choosing the required menu, set this parameter to ON (turning on
the status indicator) or OFF (turning off the status indicator). By default, set this
parameter to ON.
c.
Video content loop: When this parameter is set to ON, a recorded video file is
automatically saved once by segment every 15 minutes. When this parameter is set to
OFF, a recorded video file is automatically saved once by segment every 30 minutes.
d.
Auto to standby: Set this parameter to OFF, 2 mins, 5 mins, or 10 mins. You can select the
time for automatic standby. After presetting the time, the system starts counting time
when there is no task or operation. When the preset time is reached, the SD21 video
camera disables the input/output and enters standby mode. During time counting, the
system restarts counting time if any tasks or operations are carried out. During the
standby period, the Kogan 3+ Action Camera starts working if the Video, Photo, or Stop
key is pressed. In factory setting, this parameter is set to OFF.
e.
TV output system: Set this parameter to NTSC or PAL. You can set the video system for
output on a TV set. A black screen appears for two seconds during switchover between
the NTSC and PAL systems, and this situation is normal.
Note: Before using the video camera, select NTSC or PAL depending on your region.
After the video system is selected, the light source frequency also changes to avoid
image blinking during video recording.
f.
G-Sensor: If this parameter is set to “
ON
”, the video camera starts video recording when
the video camera is shaken or when the vehicle starts. If the video camera does not shake
or when the vehicle stops, the video camera stops video recording in about three
minutes. By default, this parameter is set to OFF.
g.
Contrast: Set this parameter to “
Standard
” by default. To improve the image effect
during night shooting, set this parameter to “
Enhanced
”.
h.
ISO sensitivity: This parameter is set to Auto by default. To improve the image effect
during night shooting, set this parameter to “
Low lux
”.
i.
Metering: Set this parameter to “
Average
” by default to ensure the general exposure
effect. If the central area is dark but the surrounding area is bright, set this parameter to
“
Central Area
” to improve the imaging effect in the central dark area. If the central area is
bright but the surrounding area is dark, set this parameter to “
Central Spot
” to improve
the imaging effect for the surrounding dark area.
j.
Language: Press the “
<
” or “
>
” key to choose your desired language.
k.
Date/time: You can adjust the date and time, which are overlapped in the bottom-right
8
Summary of Contents for KHACT3BCAMA
Page 1: ......
