Connecting a HDMI or AV Cable
Connecting with an HDMI Cable or an AV Cable,You can play recorded files on a TV set or a
monitor that has a HD port, using an HDMI cable to connect the Kogan 3+ Action Camera to the
TV set or monitor.
Note:
•
After connecting to a monitor by HDMI cable, select
the proper input source for the Kogan 3+ Action
Camera to play files.
•
When using an AV cable, connect the terminals of the
AV data cable to the ports in the same color on the
TV set or monitor. Ensure that the TV set or monitor is
properly grounded.
•
Adjust the parameter settings of the monitor to
achieve the optimal display effect.
Installation/Use of Backup Battery
Installing a Battery
You can install the D23 battery onto the Kogan 3+ Action Camera without setting any
parameters for power supply, as shown in the following figure:
Checking the Battery Power
You can gently press the Power key to check the power of the backup battery. The LED
indicator on the battery blinks for three seconds in different colours to show the current power.
Recharging the Battery
You can connect the standard power unit of the Kogan 3+ Action Camera to the USB recharging
interface of the D23 battery or connect a computer to the USB recharging interface of the D23
battery by using a USB data cable for recharging, as shown in the following figure. This backup
battery has automatic protection against overcharging and short circuit. The red indicator light
keeps flashing when charging the battery and the green indicator light is on when the battery is
fully charged. (The battery can be charged for 500 times.)
Note:
•
Do not remove the backup battery randomly.
•
If the Kogan 3+ Action Camera is not used for a long time, recharge the battery every six
months to extend the battery life.
15
Summary of Contents for KHACT3BCAMA
Page 1: ......
