Technical Specifications
Option
Specifications
Option
Specifications
View angle
170°
Format for video recording (in NTSC
system)
1080P (1920x1080P) 30 frames /
second
1080i (1920x1080I) 60 frames /
second
960P (1280x960P) 30 frames /
second
720P (1280x720P) 60 frames /
second
720P (1280x720P) 30 frames / second
WVGA (848x480P) 120 frames /
second
WVGA (848x480P) 60 frames /
second
Number of pixels
8 million CMOS sensor
(3200x2400)
Battery
1000mAh lithium battery
1100mAh backup battery
Power consumption
650 mA @ 3.7 V (Max)
Continuous duration for video
recording
80 Minutes (Standard battery)
Video recording
Recording video files in MOV format
Standby duration
100 hours (Max.)
Audio recording
Recording audio files in WAV format
Recharging duration
Approximately 3.5 hours
Shooting
3M, 5M, 8M JPEG images available for
shooting resolution
MicroSD Card capacity
64GB (Max.)
USB interface
2.0
Operating humidity
15%–85% RH
Operating system
Windows 7+ or Mac OS
Storage temperature
-20°C ~ +60°C
Weight
80 g (without the screen)
105 g (with the screen)
Operating temperature
-10°C ~ +50°C
File storage
30 minutes per segment in normal
cases
15 minutes per segment in cyclic
recording mode
Dimensions (W x H x D)
60 mm x 51 mm x 42 mm
Product Warnings
Waterproof Housing
The waterproof housing is a precision component. When using the waterproof housing, adhere
to the following precautions:
1.
Do not randomly remove or change the O-ring, key, and lens cover. Otherwise, the
waterproof performance deteriorates.
2. Do not put the waterproof housing in a place where corrosive gases are easily generated
due to strong acid or alkali. Do not make the waterproof housing in contact with
chemical or corrosive objects, such as strong acid or alkali.
3. Do not put the waterproof housing in a place where temperature is high (50°C) or low
(-10°C) for a long time to avoid deformation.
4. Do not expose the Kogan 3+ Action Camera to sunshine for a long time to avoid
deterioration of the waterproof performance.
5. Before use, ensure that the O-ring is intact, the seal is litter-free, the housing is fully
sealed, and the buckle is tight.
6. After using the housing in sea water, wash it using fresh water, clean it, and dry it in a
cool place.
3M Dual-side Sponge Rubber
When using the 3M dual-side sponge rubber, adhere to the following precautions:
1.
Before fixing the 3M dual-side sponge rubber, select a curved or flat surface to ensure
proper contact between the sponge rubber and the curved or flat surface.
2. Before using the 3M dual-side sponge rubber, clean the surface where the sponge rubber
is attached.
3. Before attaching the 3M dual-side sponge rubber, heat the surface of the sponge rubber
using an electric blower, especially in a place where temperature is lower than -20°C.
16
Summary of Contents for KHACT3BCAMA
Page 1: ......
