corner of a video or shooting file during video recording or shooting.
l.
Format: Select “
Format
” to remove all the files.
Note: If a memory card is inserted, the video camera formats the memory card .
m.
Recover factory setting: This parameter restores all parameter settings to the factory
settings. After you set this parameter, the system displays all the menu options in English.
Press the M key to display menu options. Press the “
<
” or “
>
” key to display the “
System
Setup
” menu. Press the “
–
” key, and choose “
Language
”. Then set the system in your
desired language. After resetting to the factory setting, the system displays 01/01/2013
00:00 for the time.
n.
Ver: This parameter only shows the version number of the software used on the video
camera.
Note: When selecting a state from a submenu, press the “
M
” key for a backward
operation, and press “
OK
” for confirmation.
Operations
1. Insert a Micro SD card into the Kogan 3+ Action Camera.
Note: Use a branded Micro SD card, for example, Transcend Class 10 memory card.
2. Powering on the Kogan 3+ Action Camera
Turn the power switch to the ON position to power on the Kogan 3+ Action Camera. At this
time, the red indicator is on, and the Kogan 3+ Action Camera changes to the preview state.
Note:
•
If the battery power is low, the “ ” symbol is displayed on the TFT screen
together with a prompt.
•
If no Micro SD card is inserted, no symbol is displayed in the bottom-right corner
of the TFT screen.
3. Recording a Video
In the preview state, press the “
Video
” key to start video recording. The video recording
duration is displayed in the upper-right part of the TFT screen. The "Video/Audio indicator
(green)" and the "Video/Photo indicator (green)" on the top of the video camera blink slowly.
The recording duration is correctly displayed on the LCD segment screen. During video
recording, the video camera responds only to operations for the zoom in (
+
) and zoom out (
–
)
keys. Press the “
Stop
” key once to stop and save the currently recorded video file, and the video
indicator (green) on the front side is off. The video camera restores to the preview state. The
recording duration disappears on the LCD segment screen.
Note:
•
During video recording, turn the power switch to the “OFF” position to power off the
video camera after saving the currently recorded file.
•
During video recording, if the battery power runs low, the system saves the currently
recorded file and enters standby mode, displaying a prompt of “Low battery ” on the TFT
screen, until the video camera is powered off.
•
During video recording, if the Micro SD card is full, the system saves the currently
recorded file. The system also displays a message “Card full” on the TFT screen,
indicating that the Micro SD card is full. In addition, the duration for video recording
stops on the LCD segment screen, and the system restores to the preview state.
•
In cyclic recording mode, the system automatically saves a file every 15 minutes. (The
cyclic recording function and the pre-video function cannot be simultaneously enabled.)
•
In WVGA/100 and WVGA/120 modes, the video camera does not support the time
display, zooming, and 180° photo rollover functions. In 1080i/50 and 1080i/60 modes,
the video camera does not support the time display function.
•
In audio recording mode, the volume cannot be adjusted by pressing the “+” or “–” key.
In playback, however, the volume can adjusted by pressing the “+” or “–” key.
•
If the video camera provides a TFT screen and is in the preview state, after using a HDMI
patch cord to connect the video camera to a HD display device, you can perform basic
operations for the video camera on the HD display device (These basic operations,
however, cannot be performed if no TFT screen is available on the video camera).
9
Summary of Contents for KHACT3BCAMA
Page 1: ......
