Kogan KA2VTABLSTA, User Manual

Page: 7 / 12

Remove plug from the mains socket and allow the appliance to cool down before cleaning.
1.
Clean the base unit by wiping it with a damp cloth. A little detergent can be added if
needed.
2.
Clean blade assembly in warm soapy water.
3.
To clean the blades, connect the blade assembly and fill the jug halfway with warm
soapy water. Function for 30 seconds. Empty the waste water and rinse with fresh hot
water. Repeat if necessary.
Storage
1.
Unplug the power cord from the power outlet and clean as above.
2.
Allow the appliance to dry fully.
3.
It is good practice that the blade assembly is attached to the jug. This will prevent the
blades from being misplaced and reduce cutting hazards.
4.
Store on a flat, dry level surface, out of reach of children.
CLEANING & CARE
Notes:
•
Do not immerse the blender in water or any liquids.
• Do not immerse the base unit of the appliance in water and ensure no water
enters the appliance.
• Do not use scouring pads, steel wool, any form of strong solvent, or abrasive
cleaning agents to clean the appliance as they may damage the outside
surfaces of the appliance.