Kogan IBIZA KASPABWIBZA, User Manual

Page: 23 / 32

Cleaning the Spa
Detergent residues and dissolved solids from bathing suits and chemicals may build up on
the spa walls. Use soap and water to clean the walls and rinse thoroughly. NOTE: DO NOT
use hard brushes or abrasive cleaners.
Deflation
Your spa is equipped with a deflation function to remove all the air from inside the chamber
to make it easier to pack and store.
Repairs
For PVC parts
If the spa is torn or punctured, use the provided underwater adhesive repair patch.
1. Clean area to be repaired.
2. Carefully peel patch.
3. Press patch over area to be repaired.
4. Wait 30 seconds before inflation.
For Tritech PVC material
If the spa is torn or punctured, use the provided PVC repair patch and glue (not included)
following these steps:
1. Clean and dry area to be repaired.
2. Cut the provided PVC patch to appropriate size.
3. Use glue (not included) to coat the one side of the newly cut patch. Make sure the
glue is evenly distributed.
4. Wait for 30 seconds and then place the cut patch with glue over the damaged
area.
5. Smooth out any bubbles of air that may be trapped underneath and press firmly for
two minutes.
6. The product is once again ready for use. Repeat this process should further leaks
occur.
7. Wait 30 minutes before inflation.