background image

 
 
 
 
Read all of the instructions before use, and retain this user guide for future reference. 

SAFETY INSTRUCTIONS 

WARNING! 

When installing and using this electrical equipment, basic safety precaution should always 

be followed, including the following: 

Important safety instructions – read and follow all instructions.

 

 

WARNING: 

 

WARNING:

 This appliance is not intended for use by persons (including children) 

with reduced physical, sensory or mental capabilities or lack of experience and 

knowledge, unless they have been given supervision or instruction concerning use 

of the appliance by a person responsible for their safety. Children should be 

supervised to ensure that they do not play with the appliance. 

 

Risk of Accidental Drowning:

 Extreme caution must be exercised to prevent 

unauthorized access by children. To avoid accidents, ensure that children cannot 

use this spa unless they are supervised at all times. 

 

For safety around children and to minimise drowning risk, always fit the spa cover 

after each use. 

 

RISK OF INJURY:

 Do not operate spa if inlet or outlet pipes are broken or missing. 

Never attempt to replace the inlet and outlet pipes. Contact help.kogan.com for 

assistance. 

 

Risk of electric shock:

 Install at least 2 metres from all metal surfaces. 

 

Risk of electric shock:

 Never operate any electrical appliance when in your spa or 

when your body is wet. Do not place any electrical appliance (such as a light, 

telephone, radio or television) within 2 metres of spa. 

 

TO AVOID ELECTRIC SHOCK, DO NOT USE THE SPA WHEN IT IS RAINING. 

 

WARNING:

 Always keep plug dry. NEVER plug or unplug with a wet hand. 

 

WARNING:

 For electrical safety, a leakage current detecting device is incorporated 

in the power cord. If leakage current exceeding 10mA is detected, the device will cut 

off the power supply. In the event of cut-off, unplug the spa and stop using at once. 

Contact help.kogan.com for assistance in resetting the space. Do not attempt to 

reset the spa by yourself.  

 

Caution:

 In order to avoid a hazard due to inadvertent resetting of the thermal cut-

out, this appliance must not be supplied through an external switching device, 

such as a timer or connected to a circuit that is regularly switched on and off by the 

utility. 

              SAFETY & WARNINGS 

Summary of Contents for IBIZA KASPABWIBZA

































Reviews: