MJ400215A1
10
11) RLFD
：
Acquisition of the display cut setting (0 shown if within ±1%F.S.)
The display cut setting (0 shown if within ±1%F.S.) is acquired.
Data Command: None
Response: Decimal 1 digit (fixed length 1 byte)
0
：
Disable (No display cut)
1
：
Enabled (Forced indication of “0”)
12) WLFD
：
Setting of the display cut setting (0 shown if within ±1%F.S.)
Set the display cut setting (0 shown if within ±1%F.S.)
Data Command: Decimal 1 digit (fixed length 1 byte)
0
：
Disable (No display cut)
1
：
Enabled (Forced indication of “0”)
Response: None
13) RALM
：
Acquisition of the alarm occurrence status
The alarm occurrence status is acquired.
Data Command: None
Response: Decimal 1 digit (fixed length 1 byte)
0
：
No alarm
1
：
Alarm present (
Sensor error
)
2
：
Alarm present (Valve overheat)
3
：
Alarm present
(Sensor faulty and valve overheated)
14) ZERO
：
Execution of sensor zero adjustment
Sensor zero adjustment is executed.
Ensure that no gas is flowing before starting adjustment.
Data Command: None
Response: None
