Koenic KRVC 2320 RC, User Manual

Page: 20 / 148

Size - A5
20
English
Congratulations!
Thank you for your purchase of KOENIC
product. Please read this manual carefully and
keep it for future reference.
Intended use
The robot vacuum cleaner is designed only to
vacuum dry dust and can be used in a swap
mode. Suitable to use on tile, marble and carpet
floors. Using it for anything else can damage
the device or cause injury.
The Imtron GmbH assumes no liability for
damage to the product, for property damage or
for personal injury due to careless or improper
usage of the product, or usage of the product
which does not meet the manufacturer’s
specified purpose.
Before first time use
Remove the product and its accessories
carefully from the original packaging. It is
recommended to keep the original packaging
for storage. If you wish to dispose of the
original packaging, please observe applicable
legal provisions. Should you have any questions
regarding proper disposal, contact your local
waste management center.
Inspect the delivery contents for completeness
and damages. Should the delivery contents
be incomplete or damaged, contact your sales
outlet immediately.
After unpacking, please refer to chapter
Cleaning and care .
Content
1 x Robot vacuum cleaner with dust container
1 x Charging station with charger
1 x Water tank
2 x Mop cover
1 x Cleaning brush
2 x Side brush sets
2 x Batteries (AAA/LR03)
1 x User manual
1 x Warranty card
Controls and components
A
Shock absorber
B
Exhaust holes
C
Dust container release
D
Dust container
E
On/Standby switch with power LED
F
DC jack, vacuum robot
G
Charging station
H
Charging contacts
I
Charge control LED
J
DC jack, charging station
K
Dust pre-filter and fine filter
L
HEPA filter
M
Filter holder
N
Filter bottom lid
O
Brush roller
P
On/ off switch
Q
Drive wheels
R
Rotary brushes
S
Battery compartment with lid
T
Vacuum cleaner charging contacts
U
Depth sensor
V
Charger with charging cable and DC plug
W
Water tank with mop cover and cap
(not shown)
X
Cleaning brush
Y
Replacement mop cover
Remote control
1
Transmitter diode
2
Vacuuming mode button
3
Button forward
4
Button left
5
Timer button
6
Button charging station
7
Time button
8
Button backward
9
Button right
10
Start / Pause button
11
Mode button
12
Display
IM_KRVC2320RC_190807_V10_HR.indb 20 7/8/2019 14:43