Koehler K88530, Operation And Instruction Manual

Page: 10 / 24

K8853X Air Release Value Instrument
Operation and Instruction Manual
K8853X-Manual
- 4-
1.3 Instrument Specifications
Model: K88530
K88539
Electrical
Requirements:
115V 60Hz
220-240V 50/60 Hz
Temperature Range: Ambient to 75°C
(167°F)
Dimensions
WxDxHin.(cm):
24x23x34
(61x58.4x86.4)
Net Weight: 115 lbs (53kg)
2 Safety Information and Warnings
Safety Considerations. The use of this
equipment may involve hazardous materials and
operations. This manual does not purport to
address all of the safety problems associated with
the use of this equipment. It is the responsibility of
any user of this equipment to investigate,
research, and establish appropriate safety and
health practices and determine the applicability of
regulatory limitations prior to use.
Equipment Modifications and Replacement
Parts.
Any modification or alteration of this
equipment from that of factory specifications is not
recommended voids the manufacturer warranty,
product safety, performance specifications, and/or
certifications whether specified or implied, and
may result in personal injury and/or property loss.
Replacement parts must be O.E.M. exact
replacement equipment.
Unit Design. This equipment is specifically
designed for use in accordance with the applicable
standard test methods listed in section 1.2 of this
manual. The use of this equipment in accordance
with any other test procedures, or for any other
purpose, is not recommended and may be
extremely hazardous.
Over-temperature Protection. This unit is
equipped with Over-temperature Protection (OTP)
circuitry to prevent overheating. The unit will
automatically interrupt power whether equipment
malfunction
or operator error causes the
temperature to exceed either 20 °C above the set
point or the maximum recommended temperature
range. The power can only then be restored by
identifying and correcting the problem, allowing
the
unit to return to normal operating
temperatures, and resetting the power to the unit.
Chemical Reagents Information. Chemicals and
reagents used in performing the test may exhibit
potential hazards. Any user must be familiarized
with the possible dangers before use. We also
recommend consulting the Material Data and
Safety Sheet (MSDS) on each chemical reagent
for additional information. MSDS information can
be
easily located on the internet at
http://siri.uvm.edu or http://www.sigma-
aldrich.com.
3 Getting Started
The instructions for preparing the equipment
assume that the user is aware of the contents of
this document, which lists the warranty conditions
and important precautions.
3.1 Packing List
•
K8853X Air Release Value Instrument w/
Integrated Balance and Circulation Bath
•
K88530-1 Jacketed Test Vessel
•
K88530-03509 Sinker, 10mL
•
K88530-03514 Sinker, 5mL
•
K88530-2 RTD Temperature Probe
•
K8853X-Manual K88500 Air Release Value
Instrument Operation and Instruction Manual
Accessories (purchased separately):
•
K885-115-1 Convection Oven, 115V 60Hz
OR
•
K885-240-1 Convection Oven, 230V 50/60Hz
3.2 Unpacking
1. The K8853X Air Release Value instrument will
ship and arrive in a Wooden Crate.
2. To open the Wooden Crate, a crowbar or
prybar and a hammer will be required. Use the
crowbar and hammer to first open the top of
the crate.
3. Once the entire top piece is removed, observe
inside the crate for the instruments orientation.
Locate the front of the instrument and remove
the corresponding front panel of the wooden
crate.