background image

Low Temperature Torque Apparatus  

Operation and Instruction Manual 

 

K18854,55,64,65-Manual

    

 

-

7-

 

 
 
Our  instrument  manual  will include  this  compliance  statement  and  indicate  that  any  collection  of  materials  will  be 
handled by their authorized distributor. In the event that the distributor is unreachable or is no longer a distributor 
for Koehler Instrument, Co., other arrangements may be made including accepting the materials directly. 
 
Recycling is free of charge. Shipping is the responsibility of the end users. Whether shipping to a distributor or to 
Koehler directly, safe, properly declared, and labeled packaging and shipping expenses are the sole responsibility 
of the end user. 
 

WEEE Marking 

 
 
 
 
 
 
 
 
 
 
Since  Koehler  products  are  subject  to  the  WEEE  Directive  we  must  display  the  WEEE  symbol  shown  above  in 
accordance with European Standard EN 50419 on the equipment. It must be indelible, at least 5mm in height, and 
clearly legible. If the equipment is too small the mark must be in the product literature, guarantee certificate, or on 
the packaging. Rules on marking are established in section 49 of the WEEE Order. 
 
Koehler Instrument Company, Inc. 
c/o RECYCLING 
1595 Sycamore, Ave. 
Bohemia, NY 11716 
 
As a minimum the following substances, preparations and components have to be removed from any separately 
collected WEEE: 
- Mercury containing components, such as switches or backlighting lamps (compact fluorescent lamps, CFL), 
- Batteries 
- Printed circuit boards if the surface of the printed circuit board is greater than 10 square centimeters (about 4 sq 
in.), 
- Toner cartridges, liquid and pasty, as well as color toner, 
- Chlorofluorocarbons (CFC), hydrochlorofluorocarbons (HCFC) or hydrofluorocarbons (HFC), hydrocarbons (HC) 
- Liquid crystal displays (together with their casing where appropriate) of a surface greater than 100 square 
centimeters and all those back-lighted with gas discharge lamps, 
- External electric cables 
- Components containing refractory ceramic fibers as described in Commission Directive 97/69/EC of 5 December 
1997 adapting to technical progress Council Directive 67/548/EEC relating to the classification, packaging and 
labeling of dangerous substances (2), 
- Electrolyte capacitors containing substances of concern (height > 25 mm, diameter > 25 mm or proportionately 
similar volume) 
 
2. The following components of WEEE that is separately collected have to be treated as indicated: 
- Equipment containing gases that are ozone depleting or have a global warming potential (GWP) above 15, such 
as those contained in foams and refrigeration circuits: the gases must be properly extracted and properly treated. 
Ozone-depleting gases must be treated in accordance with Regulation (EC) No 2037/2000 of the European 
Parliament and of the Council of 29 June 2000 on substances that deplete the ozone layer (4).

 

 
 
 
 

Summary of Contents for K18854























Reviews: