12
Symptom Possible
Cause
Solution
No detergent.
Black-coloured detergent
nozzle not attached.
Detergent suction tube
not properly attached.
Filter on detergent suction
tube is clogged.
Detergent suction tube
damaged or blocked
Nozzle
obstructed.
Detergent
container
empty.
Attach the black-coloured
detergent nozzle (see page 7).
Check connection.
Run warm water through filter
to remove debris.
Remove obstruction or replace
detergent suction tube.
Clean nozzle (see Page 9).
Replace detergent container.
Pump is noisy.
Pump is sucking air.
Check that hoses and fittings are airtight.
Turn off machine and purge pump by
squeezing gun trigger until a steady flow
of water emerges through the nozzle.
Water or oil leaking
from bottom of unit.
Check that all fittings are tight.
If excessive leaking occurs,
call Customer Service hotline.
Loose fittings.
A small amount of leakage
is normal.
Excessive leaking may indicate
water seals damaged or worn.
Trigger will not move.
Gun safety-lock engaged.
Release safety lock.
If you encounter any difficulties not listed above,
please contact the Customer Service hotline.
IMPORTANT:
Always follow the Shutdown Instructions (see page 8) before working on
the unit or the accessories. Always discharge residual pressure and turn the engine OFF.
Water leaking
Loose fittings.
Check that all fittings are tight.
Troubleshooting
– continued
Customer Service Hotline:
1-800-461-1323
visit our website:
www.kodiakpower.ca
