background image

2

Safety Overview

This unit was designed for specific applications. It 
should not be modified or used for any application 
other than that for which it was designed. 

The Owner's Manual constitutes an essential part 
of the pressure washer and should be kept in a 
safe place for future reference. If you sell the 
pressure washer, all manuals should be provided
to the new owner. Read this manual carefully 
before using the product – know your equipment. 

Save these instructions. The Owner's Manual 
should remain with unit at all times.

continued ...

Important Safety Precautions

  6. Always use both hands during operation to 
 

 maintain complete control of the gun/lance 

 

 assembly. Expect it to kick back when the 

 

 gun is triggered.

  7. Always engage the gun safety-lock when not 
 

 spraying to prevent accidental triggering.

  8. Always wear protective clothing and safety
 

 glasses. Protect your eyes and skin from

 

 contact with sprayed materials.

  9. Stay alert – watch what you are doing.
 10. DO NOT operate the product when fatigued
 

 or under the influence of alcohol or drugs.

 11. Learn how to stop the machine and release 
 

 pressure quickly. Be thoroughly familiar with 

  

the 

controls.

 12. Parts of the engine get extremely hot during 
 

 operation. Never touch engine while it is hot 

 

 or running; allow engine to cool down to avoid 

  

injury.

 13. DO NOT add fuel while the engine is running 
 

 or still hot. Doing so could result in a fire or an 

 

 explosion. (Please refer to the Honda Engine 

 

 Owner's Manual for fueling procedures.)

14.  Before transport, ensure that the fuel is shut  
 

 OFF and that the unit is in an upright position  

 

 to avoid fuel spillage. Fuel vapor or spilled

 

 fuel may ignite.

 15. DO NOT allow the hose to touch any part of 
 

 the engine while it is running or still hot. A hot 

 

 engine could melt through the hose.

 16. Work in a well-ventilated area. The pressure 
 

 washer should not be used in areas where 

 

 gas vapours may be present. A spark could 

 

 cause an explosion or fire.

 17. To allow free air circulation, DO NOT cover the 
 

 pressure washer during operation.

 18. DO NOT over reach or stand on an unstable 
 

 support. Keep good footing and balance at all 

 

 times when using this equipment.

 19. The narrow pencil-point spray is very powerful. 
 

 It is NOT recommended for use on painted 

 

 surfaces, wood surfaces or items attached 

 

 with an adhesive backing.

 20. Only use pressure washer detergent with this 
 

 product. Carefully observe all instructions and 

 

 warnings before using detergents.

 21. DO NOT use this product to spray chemicals, 
 

 acids, solvents, insecticides or any flammable 

 

 material. These products can cause physical 

 

 injuries to the operator and irreversible 

 

 damage to the unit.

Safety Precautions

The following safety precautions are essential for 
the safe operation of your pressure washer. Make 
sure anyone who may be using this gas-powered 
pressure washer is familiar with these important 
safety and equipment precautions.

If safety precautions are overlooked or ignored, 
personal injury or property damage may occur. 
Always heed these precautions, as they are  
essential when using any mechanical equipment.

  1. High-pressure spray can be dangerous if  
 

 subject to misuse. DO NOT direct the water 

 

 spray at persons, animals, electrical devices, 

 

 or the machine itself. 

  2. Never touch the water spray.
  3. Never hold on to the hose or fittings while 
 

 operating the pressure washer.

  4. Keep operating area clear of all persons. To 
 

 reduce the risk of injury, DO NOT operate the 

 

 machine near children. 

  5. Keep work area free of obstacles. Remove 
 

 loose objects from spray path. Secure light 

 

 objects to be cleaned.

 

IMPORTANT: Your pressure washer operates 

  at fluid pressures and velocities high enough 
  to penetrate human and animal flesh, which 
  could result in serious injury or amputation. 
  Leaks caused by loose fittings, damaged or 
  worn hoses can result in injection injuries.

  WARNING: DO NOT treat fluid injection as 
  a simple injury. Fluid injection can lead to  
  amputation. See a physician immediately.

Summary of Contents for CG2600T















Reviews: