5
WARNING:
Operating unit without water can damage seals and void the warranty.
Always trigger gun until steady stream of water flows from nozzle to ensure unit is
receiving water correctly before starting the engine.
Please refer to the Engine Owner's Manual for more details.
Step 1.
If the engine is cold, pull engine choke rod out to the CLOSED position.
Step 2.
Move throttle control about 1/3 of the way toward the FAST position.
Step 3.
Pull the starter grip to start engine.
Step 4.
Push choke rod back to OPEN position.
Step 5.
Throttle up to full RPMs. Refer to the Engine Owner's Manual for details.
Step 6.
Press the gun trigger gently.
DO NOT pump the trigger rapidly between ON and OFF settings
Step 5
Continue to squeeze gun
trigger until a steady stream
of water flows from nozzle
before releasing trigger.
Step 6
Start engine and throttle up
to full RPMs. Refer to the
Engine Owner's Manual.
Step 4
Release the gun safety-lock
and squeeze gun trigger.
Operating Instructions
WARNING: THE ENGINE IS SHIPPED WITHOUT OIL.
Fill engine with the recommended oil to the
indicated level before operating the unit. Failure to do this will cause severe damage to the engine
and void the warranty. Please refer to the Engine Owner's Manual for details.
Step 2
Fill gas tank. Refer to the
Engine Owner's Manual.
Step 3
Connect the garden hose
to the water supply and
turn ON water full force.
Step 1
Check engine oil. Refer to
the Engine Owner's Manual.
Engine Quick-Start Procedure
CAUTION:
Always shutdown the pressure washer when it is not in use.
Please refer to the Shutdown Instructions on page 8 for details.
