Koden MDC-2240, Operation Manual

Page: 97 / 129

Chapter 4 Menu operations MDC-2200/2500 Series
0093125002-05 4-44
4.10 STARTUP menu
Following setting items are provided in Startup menu.
Refer to Installation manual for detailed operation of STARTUP menu.
Also refer to “3.16 Use F (Function key) “of this document for function key setting.
(1) Tuning method
This item is to select tuning method (Auto or Manual).
Normally Auto is selected. Manual is selected when optimum image cannot obtained by auto mode.
(2) Auto tune setting
Execute fine tuning in case “Auto” selection of item (1) tuning method is selected.
(3) Manual tuning setting
Execute fine tuning in case “Manual” selection of item (1) tuning method is selected.
(4) Bearing setting
Adjust calibration of actual image bearing to align to bearing on the radar screen.
(5) Range adjustment
Adjust calibration of actual target range to align to range on the radar screen.
TUNE SELECT
TUNE AUTO
TUNE MANUAL
BRG ADJ
TX DELAY ADJ
STC CURVE1
MBS
F1 KEY SET
F2 KEY SET
F3 KEY SET
RAIN KEY SET
SEA KEY SET
GAIN KEY SET
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
AUTO / MANUAL
0 - 255 (Setting for tuning method “Auto”)
0.0 - 100.0 (Setting for tuning method “Manual”)
-180 ° - 180 °
0 - 255
0 - 15
0 - 30
F1 function key setting
F2 function key setting
F3 function key setting (MDC-2500 only)
Setting to Rain key
Setting to Sea key
Setting to Gain key