Koden MDC-2240, Operation Manual

Page: 52 / 129

Chapter 3 Basic operation MDC-2200/2500 Series
0093125002-04 3-28
3.16 Use F (Function key)
This device is provided with F (Function).
Function key can be operated easily when assigned functions to the function key.
It has following keys in the function keys.
For MDC-2200 F1, F2, ”SEA” “RAIN” and “Gain”
For MDC-2500 F1, F2, F3 , ”SEA” “RAIN” and “Gain”
( Key functions of “SEA” “RAIN” and “Gain” are available by pressing each knob) ,
Assignment method of function key
1
Press [MENU] key to display “Menu”.
Select [STARTUP] => [F1 KEY SET], and then press [ENT] key after selecting assignment item.
TUNE SELECT
TUNE AUTO
TUNE MANUAL
BRG ADJ
TX DELAY ADJ
STC CURVE1
MBS
F1 KEY SET
F2 KEY SET
F3 KEY SET
RAIN KEY SET
SEA KEY SET
GAIN KEY SET
RANGE RINGS
BRG TRUE/REL
DAY/NIGHT
MODE
TRAILS
IR
PROCESS
ZOOM
TM RESET
HOLD
VECT TRUE/REL
ALARM1
GUARD ZONE
ACQ
DELETE
ALL DELETE
TARGET
UPDATE
CHART
MARK OWN
MARK CURSOR
TLL OUT
UPPER DISP
VIDEO MODE
SHORT CUT
OFF
MARKER
NAV
ALARM
CHART
DETADISP
STARTUP
ECHO
Move to
the right
ATA/EPA
AIS*
* : Displayed at installation of AIS unit (optional).
Move to
the right
2
The same procedure as step 1 is applied for [F2 KEY SET], [F3 KEY SET], [RAIN KEY SET], [SEA
KEY SET] and [GAIN KEY SET] by selecting each item and pressing the [ENT] key.
For short cut menu
“ Short cut menu” of arbitrary menu screen which has no assignment item to the function key can be
set up. The set up screen menu can be displayed immediately by pressing function key.
The operation becomes easy if sub-menu in the detailed menu is set up.
Setting method of short cut
1
Select short cut menu by using function key (for example [F1] key).
2
Display arbitrary menu to be set by operating menu..
3
Press [OFF] key + [F1] key.
4
The setup is complete when beeping the buzzer for about 2 seconds.
5
Press [F1] key under the state of menu being deleted. Then the assigned short cut menu will be
displayed immediately.