Koden MDC-2240, Operation Manual

Page: 49 / 129

MDC-2200/2500 Series Chapter 3 Basic operation
0093125002-04 3-25
EPA operation method
1
Move the cross cursor with [Joystick] to lay on the desired target.
(For MDC-2500)
Press [ACQ] key on the upper right of the operating panel. The symbol of starting acquisition is
overlaid on the target.
(For MDC-2200)
Press [F2] key
Note1
. The symbol of starting acquisition is overlaid on the target.
(Note 1) In MDC-2200, [F2] key is assigned to “Acquisition” at the setting in factory.
＋
[ACQ] key
Note : When acquiring 2 or more target (up to 50), select target number by using Menu then start
operation.
2 After 30second passed, lay cross hair cursor on moved target then press [ACQ] key ([F2] key for
MDC-2200) again.
Note : When acquiring 2 or more target (up to 50), select target number by using Menu then start
operation.
・ The symbol moves to the latest target position and its course and speed are displayed by vector.
・
Up to 5 history track points are shown on the display with [
・
] symbol.
＋ [ACQ] key
3
As the symbol moves according to the latest vector data, periodic use of procedure 2 above,
allows the symbol to keep tracking the target which changes its speed and heading.
・
If no additional manual tracking is done within 10 min and over, the EPA reliability is judged to have
been lost and the symbol stops tracking.
・ If no additional manual tracking is performed within 15 min and over , tracking is deleted
automatically.