Kodak i800 Series, Instruction Manual

Page: 5 / 25

Cleaning the paper path
This chapter provides cleaning and replacement procedures for
your scanner. For best scanner performance clean the areas
outlined in this chapter every 8-hour shift, unless otherwise noted.
Additional maintenance supplies can be ordering by calling DI
Supply or through your Kodak Reseller. For a list of available
supplies, see the section entitled, “Ordering Supplies” at the end of
this chapter.
See Chapter 3, Operator Control Panel Functions, for procedures.
The paper path should be cleaned with a Paper Path Cleaner fed
several times through the transport. To clean the paper path:
1 Remove the wrapping from the Paper Path Cleaner.
2 Adjust the feeder guides to the widest position.
3 Run the scanner in count-only mode.
IMPORTANT
All cleaning supplies can be disposed of in your normal
waste management system, unless otherwise noted.
Use the green handles when accessing scanner
components .
I.
i i i i i800 800 800 800 800 Maintenance Maintenance Maintenance Maintenance Maintenance
2
Versitec 1- 888 - 722 - 6548 www. versitec.com