48
A-61626 January 2010
Images - Sent To Application
— saves the images received at the
scanning application from the scanner.
Simulation
— allows you to use the TWAIN Datasource without using
the actual scanner.
•
Model
: allows you to select the specific model to simulate.
•
Flatbed
: allows you to select which flatbed accessory to simulate.
•
Flags
: if supported by your TWAIN Datasource, this will contain a list
of accessories your simulate scanner has installed.
Diagnostics - Logs tab
The Logs tab allows you to view scanner information.
Logs
•
General
: displays the scanner's version information, serial number,
attached/installed accessories, meters, etc.
•
Operator
: displays the scanner's log. This log can only be cleared by
your support personnel.
Toolbar buttons
Save As
— saves all the logs for viewing by support personnel.
When selected, the Save As window will displayed:
•
Folder
: the location to save the logs.
•
Browse
: displays the operating system's File Open window so
you can find the folder that you want to use.
•
Include debug images
: includes any generated debug
images with the logs. This is turned on by default and should
only be turned off when recommended by your support
personnel.
•
Save
: saves the logs into a file with the extension .eklog.
Refresh
: refreshes the currently displayed log.
