Kodak i1210 Plus Install Manual Download Page 48

Page: 48 / 50

A-61626 January 2010

Diagnostics - Debug tab

The Debug tab allows you to turn on options that allow support
personnel to diagnose any issues you may encounter with using your
scanner. It is suggested that you only make changes on this tab when
instructed by Kodak support personnel.

NOTES:

• All of the options on this tab apply to all Setting Shortcuts, not just the

currently selected Setting Shortcut, and are saved immediately.

• In order for any changes on this tab to take effect, you must restart

your application.

Logging

— saves the communications between the scanner and a

scanning application. The options are:

Off

Custom

NOTE:

Flag

and

Filter

are only available for

Custom

Images

- Received From Scanner

— saves the images received at

the PC from the scanner.

Summary of Contents for i1210 Plus



















































Search results

Summary of Contents for i1210 Plus

Reviews:

Related manuals for i1210 Plus

Brands by name

Popular brands

Kodak i1210 Plus, Install Manual

Search results

Summary of Contents for i1210 Plus

Reviews:

Related manuals for i1210 Plus

Brands by name

Popular brands