14
A-61626 January 2010
Preview area
The preview area displays a sample image that is based on your
current shortcut settings. An image will be displayed in this area after a
preview scan has been performed.
•
Outline
: If you choose
Document: Manually Select
or
Image: Part
of a document
on the Size tab, the preview area will also show the
current outline selections. If the outline does not align with your
preview image, you may use the mouse to adjust the size and
location of the outline. As the mouse cursor moves around the
outline, the cursor will change indicating that you can adjust the
outline by pressing and holding the left mouse button.
-
Move
: place the mouse cursor within the outline to adjust the
location of the outline.
-
Corner
: place the mouse cursor over one of the corner graphics
to adjust two sides at the same time.
-
Side
: place the mouse cursor over one of the side graphics to
adjust that side.
-
Rotate
: place the mouse cursor over the rotate graphic to adjust
the angle of the outline.
Home
— returns you to the main Scanner window.
Device
— displays the Device Settings window.
Preview
— initiates a scan and places the image in the preview area.
The image displayed is a sample based on your current shortcut
settings.
OK/Scan
— when selected, you will be prompted to save any unsaved
changes.
NOTE: If this button is
OK
, any unsaved changes will remain in effect
for the current scan session.
Cancel
— closes the main Scanner window without saving any
changes.
