. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reference — Camera
G
7-35
Trouble
Possible Cause
Suggested Solution
Two characters, an “E”
followed by a single digit
(for example “E2”),
appear on the camera
back LCD.
An error occurred on
the PCMCIA card or
in DRAM.
For the problems below, remove
and reinsert the PCMCIA card and
try again. If the problem continues,
do a "sleep/awake" sequence: let the
camera back sleep (disconnect the
AC adapter from the camera back,
shut down the computer if
connected, and disconnect the
camera back from the computer),
reconnect and try again. If you
continue to have problems format
the PCMCIA card with the Format
Disk button on the driver Control
Panel (this will erase all images and
sound files from the card). If the
problem persist, contact Canon or
Kodak; report the number of the
error condition.
E2 - failure of the PCMCIA card to
start.
E3 - failure when attempting to read
the PCMCIA card.
E4 - failure when attempting to
write to the PCMCIA card.
E5 - defective card, a non-ATA card,
or a card that does not work. (Refer
to the read-me on the driver diskette
for a list of supported cards.)
E6 - unformatted PCMCIA card.
E7 - defective card, a non-ATA
card, or a card that does not
work. (Refer to the read-me on the
driver diskette for a list of
supported cards.)
