manualshive.com logo in svg

Kodak EOS-DCS 1, User Manual

The Kodak EOS-DCS 1, a groundbreaking digital camera, revolutionizes photography. Capture stunning images effortlessly with this advanced device. To unleash its full potential, make sure to get your hands on the comprehensive and user-friendly manual. Download it for free from manualshive.com and discover endless possibilities with your Kodak EOS-DCS 1.

Share
Download
background image

.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

xvi

Electromagnetic Emissions

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment generates, uses and can
radiate radio energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interfer-
ence by one or more of the following measures: reorient or relocate the
receiving antenna; increase the separation between the equipment and
receiver; connect the equipment into an outlet on a circuit different from
that to which the receiver is connected; consult the dealer or an experi-
enced radio/TV technician for help.

This equipment conforms with the requirements of European Standard
EN55022 with respect to radio interference for a Class B device.

Le présent appareil numérique n’émet pas de bruits radioélectriques
dépassant les limites applicables aux appareils numériques de la classe B
prescrites dans le réglement sur le broullage radioélectrique édicté par le
Ministère des Communications du Canada.

This digital apparatus does not exceed the class B limits for radio noise
emissions from digital apparatus set out in the radio interference regula-
tions of the Canadian Department of Communications.

This equipment is in the Class 2 category (information equipment to be
used in a residential area or an adjacent area thereto) and conforms to the
standards set by the voluntary Control Council For Interference by Data
Processing Equipment and Electronic Office Machines aimed at prevent-
ing radio interference in such residential areas. When used near a radio or
TV receiver, it may become the cause of radio interference. Read the
instructions for correct handling.

Summary of Contents for EOS-DCS 1



























































































































































































































































































































Reviews:

No comments

Related manuals for EOS-DCS 1

Banana Pi BPI-D1 Quick Start Manual preview
BPI-D1
Brand: Banana Pi Pages: 12
Olympus T-100 Manual De Instruções preview
T-100
Brand: Olympus Pages: 61
Olympus T-100 Quick Start Manual preview
T-100
Brand: Olympus Pages: 2
Idis TC-D5531RX Quick Manual preview
TC-D5531RX
Brand: Idis Pages: 12
Idis DC-S1283WRX Installation Manual preview
DC-S1283WRX
Brand: Idis Pages: 20
Tamron B023 Owner'S Manual preview
B023
Brand: Tamron Pages: 4
Tamron A067 Owner'S Manual preview
A067
Brand: Tamron Pages: 4
Tamron A025 Owner'S Manual preview
A025
Brand: Tamron Pages: 4
Tamron A007 User Manual preview
A007
Brand: Tamron Pages: 2
Tamron 360EM User Manual preview
360EM
Brand: Tamron Pages: 6
SAB SABIP1000 Quick Installation Manual preview
SABIP1000
Brand: SAB Pages: 2
Mini Gadgets WiFiDIY4K User Manual preview
WiFiDIY4K
Brand: Mini Gadgets Pages: 25
Olympus E-519 Instruction Manual preview
E-519
Brand: Olympus Pages: 140
Olympus 262921 Instruction Manual preview
262921
Brand: Olympus Pages: 124
Minolta HI-Matic AF Owner'S Manual preview
HI-Matic AF
Brand: Minolta Pages: 33
FujiFilm F480/F485 Owner'S Manual preview
F480/F485
Brand: FujiFilm Pages: 134
Lilin IPS5180E Instruction Manual preview
IPS5180E
Brand: Lilin Pages: 23
Boss Audio Systems BCAMW80 User Manual preview
BCAMW80
Brand: Boss Audio Systems Pages: 29

Brands by name

Popular brands

Load more brands