www.kodak.com/go/aiosupport
59
6
Copying
You can copy both images and documents directly from the control panel of your
Kodak ESP All-in-One printer. The printer produces high–quality color or
black and–white copies on a variety of paper types, including transparencies
NOTE: Before using your All-in-One printer to copy a document or photo for the
first time, review the procedures for loading paper and originals in
Chapter 4 , Handling Paper
.
Simple copying
NOTE:
Copy Document
is the first setting on your Kodak All–in–One printer. This
enables you to load a document face–up in the automatic document feeder
(ADF) or place a one–page document on the scanner glass, and, if you have
no need to change the default quantity, press
Start
from the Main menu to
quickly initiate a copying job.
1. Place the original (document or photo) face down at the right front corner of the
scanner glass or face up in the automatic document feeder (ADF).
2. From the control panel, press
Menu
.
3.
Copy Document
is the first menu option. As needed, press
to select
Copy
Photo
.
4. Modify the quantity of copies to be printed by pressing
on the control panel
until the number you want is between the
and
symbols displayed in the
menu. To decrease any quantity greater than 1 shown, press
until the number
you want displays.
5. Press
Start
to initiate copying the document or photo.
Adjusting copy settings
You can change the default copy document settings for your printer using the
control panel. Depending on whether you are copying a photo or a document, select
the appropriate option submenu from the main menu.
1. From the control panel, press
Menu
.
2.
Copy Document
is the first option. As needed, press
to select
Copy Photo
.
3. Press
OK
to display the
Copy Document Options
(or
Copy Photo Options
) menu.
4. You can press
until the option you want to adjust is selected. If a value is
displayed between the
and
symbols in the row, press
or
to select
the value you want.
5. Any changes you make to the copy settings apply only to the current copy
operation unless you save them as your default settings. To keep the settings as
permanent, press
until
Save as Defaults
is selected; press
OK
, and then
select
Yes
and press
OK
to save the change(s) as the new default settings.
