Kodak 5 All-in-One - ESP 5 All-in-One, User Manual

Page: 52 / 81

All-in-One Troubleshooting
46
Kodak ESP 5 Printer User Guide
Corrective Action
•
Turn the printer off and turn it back on
•
If the problem persists, unplug the power cord from the power supply and plug it back in
•
If the problem continues to persist, restart your computer
Transfer Pictures Failure
Problem
Nothing happens when you try to transfer photos to the computer.
Corrective Action
•
Remove the memory card or USB device and reinsert it
•
Check the power connection to the computer
•
If you are trying to transfer photos from a memory card and a PictBridge camera is
connected, disconnect the camera
•
Close unnecessary software applications, and minimize remaining application windows.
Follow any messages on the screen that may have been hidden by other windows
•
Disconnect then reconnect the USB cable from the printer to the computer
•
Make sure you are using a high-quality USB cable (See “No Communication With
Computer” on page 44)
•
Make sure your computer meets the minimum system requirements for using your
printer (see ““General Troubleshooting” on page 41). Upgrade your system if necessary
User Guide on the CD Is Obsolete
Probable Cause
The User Guide has been updated since the software CD was released.
Corrective Action
Download the most recent version of the User Guide from Kodak.com.
Wrong Paper Size
Probable Cause
The print size or paper size you selected may be larger or smaller than the paper found in
the paper tray.
Corrective Action
1 Replace the paper in the paper tray with the correct size.
2 Press
OK
.
If the situation continues, contact Kodak support.