![background image](http://html1.mh-extra.com/html/kodak/210433-1/210433-1_user-manual_1984182055.webp)
Printer maintenance and storage 4-9
1500 TX User's Guide
MAINTENANCE
AND STORAGE
➪
➪
➪
➪
➪
To clean the service station
1
Select Utility/Access Cartridges to move the carriage away from the
service station.
2
Raise the printer cover.
3
Locate the service station release tab at the right end of the service
station base. Move it gently to the left and lift to remove the entire
service station assembly.
4
Rinse the service station and wipers with warm water. Use cotton swabs
to clean small spaces.
5
Inspect the seals and wipers. Any damage to these parts can cause the
cartridge jetplate to clog, resulting in misfires. Compare the wipers to
the figure which follows and replace the service station if necessary.
6
Dry the service station and replace it, putting the left side in first. Make
sure the release tab re-latches.
7
Press Utility/Access Cartridge to return the carriage to the service
station.
Summary of Contents for 210433-1
