5
5. Place the lamp body over the outlet box
and feed the mounting screws through
the inner keyhole slots. There are two
pairs of keyhole slots. Please choose the
appropriate pair of keyhole slots to fit with
the of outlet box.
6. Rotate the lamp body clockwise so that
the mounting screws slide into the narrow
ends of the keyhole slots.
7. Tighten the mounting screws to ensure
the lamp body is secured against the
ceiling.
4. Carefully place all the wires and wire
connections into the outlet box.
9. When the installation is finished, you
can turn on the main power and the light
will turn on. If the light does not turn on,
please refer to the Troubleshooting section
of this manual.
8. Attach the cover to the lamp body, and
rotate the cover clockwise to secure in
place. To ensure complete securement,
please rotate the cover until you cannot
rotate further.
