4
INSTALLATION PROCEDURES:
BEFORE INSTALLATION:
Carefully remove the light fixture, mounting package, and wireless remote from the box
and check that all parts are included. Do not attempt to assemble the product if any part is
missing or damaged.
The outlet box described in this manual is not provided. A standard outlet box needs to be
pre-installed in the ceiling, and the power supply wires need to be run to the outlet box
providing 120Vac of power. If an outlet box does not exist, contact a qualified electrician for
installation.
Please turn OFF the main power at the fuse or circuit breaker before installing the light
fixture or making any electrical connection. You may use a non-contact voltage tester to
ensure no power running to the wires.
Warning:
Failure to disconnect the power supply prior to installation may result in serious
injury or death.
1. Rotate the cover (Part B) counter-
clockwise to detach it from the lamp body
(Part A).
Part B
Part A
3. Make the following spliced wire
connections using wire nuts:
• White (neutral) supply wire to White light
fixture wire
• Black (hot) supply wire to Black light
fixture wire
• Green (ground) supply wire to Green /
Yellow light fixture wires
Screw the wire nuts in a clockwise direction.
Make sure no bare wire or wire strands are
visible after making the connections.
Consult with a qualified electrician if you
have any electrical questions or if your
current power supply does not include a
ground wire.
Warning:
Never connect the ground wire to
the black or white power supply wires.
2. Install the mounting screws into outlet box
until there is about 12.7 mm / 0.5 in. between
the ceiling and underside of the screw head.
