manualshive.com logo in svg

Kobold ZOK-ExK, Operating Manual

Share
Download
Kobold ZOK-ExK Operating Manual Download Page 33

  

ZOK-E/-Z 

ZOK K14/0917 

 

Page 33 

8.3 Menu Mode 

In the menu, all device parameters can be set. The individual parameters are 
organized into groups according to their function. While the menu mode is turned on, 
the input signal detection and pulse output (option -Z3) are still active in the 
background. After leaving the menu mode, all display parameters are then updated 
again in measurement mode. 
Note: The menu mode is not exited automatically even after a certain time without key 
operation. The menu mode remains active (in battery mode) until the user has once 

pressed the 

 button.  

In battery mode, a long stay in menu mode shortens battery life.  
 

 

To activate the Menu mode, the 

button must be pressed for 3-5 sec. The 

parameters are divided into main groups and subgroups. Selected menu parameters 

are highlighted with dark background. For selection of main groups, 

 and 

 

buttons are used. In the main menu, all menu groups can not be displayed 
simultaneously on the screen so the list of menu items can then be scrolled up or 

down. To choose the selected item, 

 button should be pressed and the device 

goes into relevant sub-menu i.e. into the parameter setting level. For selection of 

predefined parameter values, 

and 

buttons are used. After changing 

the value of the parameter,

button should be pressed to save it and to return to 

the previous menu level. The return to the main menu or exit to the menu mode takes 

place by repeatedly pressing  

. 

 

Summary of Contents for ZOK-ExK





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands