NEO 01/0820
Rev A
23
|
Configuration Using Display
Step Four
TOP-LEVEL MENU
The TOP-LEVEL MENU will continue to scroll
through the items listed to the right until the OK
button is pressed.
To return to the Normal / Operational mode of
NEO-7, press OK while
RUN
appears in the
display.
How to enter the TOP-LEVEL MENU
1. Press and hold OK (approximately 5 seconds) until
MENU
is displayed.
2. The TOP-LEVEL MENU items will rotate through
display.
3. Use OK to choose a MENU item.
How to exit the TOP-LEVEL MENU
In TOP-LEVEL MENU, press OK when
RUN
appears.
STEP 2 - SETTING THE UNITS OF MEASUREMENT (UNITS)
1. In the TOP-LEVEL MENU mode, select
UNITS
.
2. Press OK to choose between
INCHES
,
CM
(centimeter),
FEET
or
METERS
.
a. Press and hold OK on the selected setting for 2
seconds then release.
a. To
cancel
UNITS
, Select
EXIT
.
3. Select EXIT to return to the TOP-LEVEL MENU.
Note: NEO-7 will adjust the display when measurement
units are changed under UNITS. Example: If you are in
inches and the display reads 60.0, the display will change to
5.00 when feet is selected as the unit of measurement.
