KSK
KSK
01
/0322
page 5
7. Electrical Connection
7.1. Reed Contact, bistable (option)
Make sure that the supply wires are de-energized.
Loosen the plug-cap holding screw and remove the cap from the switch
housing.
Connect the supply lines inside the plug in accordance with the connection
diagram opposite.
If the set point has not yet been adjusted, it may be done at this point. (see
section 8. Operation).
Set the plug to the socket and fix it with the safety screws.
Attention! The stated electrical parameters of the contact may not
be exceeded, even for a short period of time. For inductive or
capacitive loads, we recommend the use of contact protection
measures respectively the application of a contact protection relay.
