HND-P210
HND-P210 K08/0422
page 5
7. Operation
7.1 Safety Requirements
This device has been designed and tested in accordance with the safety
regulations for electronic devices. However, its trouble-free operation and
reliability cannot be guaranteed unless the standard safety measures and special
safety advises given in this manual will be adhered to when using the device.
1. Trouble-free operation and reliability of the device can only be guaranteed if
the device is not subjected to any other climatic conditions than those stated
see chapter
10 Technical Information
.
2. Device and sensors have to be handled with care (don’t throw, hit, etc.).
Protect plugs and sockets from soiling.
3. If the device is transported from a cold to a warm environment condensation
may cause in a failure of the function. In such a case make sure the device
temperature has adjusted to the ambient temperature before trying a new
start-up.
4. If device is to be connected to other devices (e.g. via serial interface) the
circuitry has to be designed most carefully. Internal connection in third party
devices (e.g. connection GND and earth) may result in not-permissible
voltages impairing or destroying the device or another device connected.
Warning: If device is operated with a defective mains power
supply (e.g. short circuit from mains voltage to output voltage)
this may result in hazardous voltages at the device (e.g. at sensor
socket or interface).
5. If there is a risk whatsoever involved in running it, the device has to be
switched off immediately and to be marked accordingly to avoid re-starting.
Operator safety may be a risk if:
there is visible damage to the device
the device is not working as specified
the device has been stored under unsuitable conditions for a longer period
of time.
In case of doubt, please return device to manufacturer for repair or maintenance.
