HND-P210
page 18
HND-P210 K08/0422
and cyclic logger (“Func-CYCL”)
Memory:
Stor: 99 data sets; CYCL: 10000 data sets
Cycle time CYCL:
1…3600 seconds (=1h)
Display:
2 four-digit LCDs (12.4mm high and 7mm high)
for measuring values, and for min/max
memories, hold function, etc. as well as
additional functional arrows.
Pushbuttons:
6 membrane keys
Interface:
Serial interface (3.5mm jack) can be connected
to RS232 or USB interface of a PC via electrically
isolated interface adapter HND-Z031 or HND-
Z032 (see accessories)
Power supply:
9V battery, type: IEC 6F22
(included in scope of supply)
as well as additional d.c. connector (diameter of
internal pin 1.9mm) for external 10.5-12V direct
voltage supply.
Power consumption:
Slow measuring rate: <1.6mA
Fast measuring rate: <7.0mA
Low-Power-Logger: <0.3mA (for cycle time >30s,
without interface communication active and no
alarm horn sounding) up to 0.8mA (at cycle time 1s)
Housing:
impact-resistant ABS, membrane keyboard,
transparent panel, Front side IP 65
Dimensions:
142x71x26mm (LxWxD)
Working conditions:
-25…+50°C, 0…95%RH (non-condensing)
Storage temperature:
-25…+70°C
EMC:
The device corresponds to the essential
protection ratings established in the Regulations
of the Council for the Approximation of
Legislation for the member countries regarding
electromagnetic compatibility (2004/108/EG)
Additional fault: <1%
Scope of functions
Minimum/maximum value memory
Hold function:
»freezing« of the current value
Automatic-off function:
1...120 min (can be deactivated)
Zero point adjustment
for connected sensor
Tare function:
display-, minimum/maximum values are set to zero
