Kobold HND-P210, Operating Instructions Manual

Page: 14 / 22

HND-P210
page 14 HND-P210 K08/0422
8.7 The Serial Interface
By means of the serial interface and a suitable electrically isolated interface
adapter (HND-Z031/-032) the device can be connected to a computer for data
transfer. To avoid transmission errors, there are several security checks
implemented e.g. CRC.
The following standard software packages are available:
 HND-Z034 : Operation and read out of logger function, data display in
diagrams and tables

BUS-SW9M : 9-channel software to display the measuring values
The device has 3 channels:
1: current measuring value (base address)
2: min peak (see chapter
8.6 Operation Of Logger
)
3: max peak ( see chapter
8.6 Operation Of Logger
)
Note: The measuring-/ alarm- and display range values read back from
the interface are always in the selected measurement unit (mbar, bar...)!
Supported functions:
Channel Code Name/Function Channel Code Name/Function
1 2, 3 1 2, 3
x x 0 Read measurement value x 208 Read # of channels
x x 3 Read system state x 222 Read power off time (Conf-P.oFF)
x 12 Read ID number x 223 Set power off time (Conf-P.oFF)
x 22 Read min alarm rail (AL. - AL.Lo) x x 224 Logger: Read data of CYCL- Logger
x 23 Read max alarm rail (AL. - AL.Hi) x
225 Logger: Read cycle time (LoGG -
CYCL)
x 32 Read configuration flag
BitAlarmOn:1; BitAlarmSound:3;
BitLoggerOn:50; BitCyclicLogger:51;
BitLowPowerLogger:52
x 226 Logger: set cycle time (LoGG -
CYCL)
x 160 Set configuration flag (refer to 32) x 227 Logger: start recording
x x 176 Read min measuring range x 228 Logger: Read # of recordings made
x x 177 Read max measuring range x 229 Logger: Read state
x x 178
Read measuring range – measuring
unit
x
231 Logger: Read stop time
x x 179
Read measuring range – decimal
point
x
233 Read real time clock (CLOC)
x x 180 Read kind of measuring of sensor x 234 Set real time clock (CLOC)
x 236 Read logger memory size
x x 199 Read kind of measuring of display x 237 Read logger filecount
x x 200 Read min display range x 238 Read logger filepointer
x x 201 Read max display range x 239 Read logger file info
x x 202 Read display range - unit x 240 Reset
x x 204 Read display range – decimal point x 254 Program version
x 260 Logger: read data of STOR Logger
x x 263 Read logger channel info