OPERATING MANUAL HPC & UMC4
Page 89 of 105
14.13.1 Language
Two languages are available in the control unit BE4: German and English. As mentioned in Section
13.4.3.1 Selection window/make a selection, the operator can toggle between these languages.
Language
[English]
Other languages such as French, Italian or Spanish will be available in a special version of the control
unit BE4.
14.13.2 Serial number
With the help of the
Serial number
function, the transmitter is assigned to an order. This number provides
access to internal vendor data if the device needs servicing. The serial number is printed on the rating
plate of the transmitter. After selecting this function, press
„Enter“ to display the following information field:
Serial number:
123456
This entry should never be changed so as to ensure that the sensor, the transmitter and the documents
created within quality management are assigned correctly.
14.13.3 Software version
When the function
Software version
is
displayed
,
the software version of the control unit BE will be
shown. Example: Version 2.0:
UMC Software
Version BE 2.0
After selecting this function, the version of the transmitter software will be shown (example: 1.78).
UMC Rev.: 1.78
EECS 78E3 CS 78E3
The second line contains the hexadecimal checksum that was calculated via the program storage created
during program development and the microcontroller checksum of the same storage. Both checksums
must be identical, when the program storage has not been damaged.
