Kobold DON-05, Operating Instructions Manual

Page: 21 / 48

DON-H
DON-H
01/0721
page 21
9.5.2 Re-assembly of DON-H15...DON-H20
Both oval gears are placed on the axle shafts with the magnets oriented towards
the upper meter body (4). Verify that the axle shafts are not loose. Both oval
gears are equipped with embedded magnets, allowing them to each be mounted
on either axle.
Install the rotors exactly perpendicular from each other (90° in orientation). They
will only work if installed precisely. Manually test full rotation after installation as
the rotors will not completely rotate freely unless installed precisely 90° from each
other.
Proper placement of the O-ring within the groove is necessary for leak free
operation. After placement, items (1 & 4) will then require assembly.
Tighten the upper meter body to the lower meter body (1 & 4) with the screws (5)
in an alternating pattern (1, 3, 2, 4). Tighten to each to a torque of 3.5 Nm. The
alternating tightening procedure is preferred for proper and even assembly.
Install the pulse detector board, the o-ring into the provided groove, and then
install either the electronic cover (9) or optional electronic assembly.
Exploded view of DON-H15...DON-H20
DON-H15...
optional