3
UNPACKING AND SETUP
This chapter provides unpacking and setup information for the Access
Point.
Unpacking
Open the box of the Access Point and carefully unpack it. The box
should contain the following items:
One Wireless Access Point
One external power adapter
One USB cable (A type to B type)
One Installation CD (Driver & U User’s guide)
One Quick Installation Guide
Two SMA reverse type antenna (2dBi) (for optional external
antenna of WLAN Access Point)
If any item is found missing or damaged, please contact your local
reseller for replacement.
Setup
The setup of the WLAN Access Point can be performed using the
following steps:
Locate an optimum location for the Wireless LAN Access Point
(AP). The best place for your AP is usually the center of your
wireless network, with line of sight to all of your mobile stations.
Visually inspect the USB or Ethernet RJ45 port connector and
make sure that it is fully plugged in to the system’s USB port or
Ethernet switch/hub port.